E-ABLE POWER
MUNICIPAL SOLAR LIGHTING SOLUTIONS
UTILITY GRADE OEM / ODM
Split-Type Lighting System | Industrial Road Application 100W Split Solar Street Light — 10M Single ArmA modular off-grid solar street lighting system with independent PV panel positioning, 100W high-efficacy LED, LiFePO4 battery storage, and MPPT controller. Designed for municipal roads, industrial parks, and remote infrastructure where standard grid connection is unavailable or cost-prohibitive. |  |
Key Specifications at a Glance
LED Power: 100W High-Efficacy SMD Solar Panel: 200W Monocrystalline Battery: LiFePO4 (4,000+ cycles) Pole Height: 10m Hot-Dip Galvanized Steel Controller: IP68 MPPT Smart Controller Autonomy: 3-4 Overcast Nights Mount Type: Single Arm Bracket IP Rating: IP65 Luminaire / IP68 Controller Certifications: CE / RoHS / ISO9001 / ISO14001 Warranty: 3 Years
Why Choose a Split Solar Street Light System?
The split-type (separate) architecture is the most versatile solar street light configuration for projects where panel orientation, battery sizing, and maintenance access are critical design factors.
Independent PV Orientation Position the solar panel at the optimal tilt angle regardless of the road direction. This is essential for mid-to-high latitude regions (30°N+) where seasonal sun angle varies by 47° between summer and winter solstice. | Scalable Battery Sizing Separate battery enclosure allows independent sizing for 3-5 days of autonomy based on local weather data. Easy access for future battery replacement without dismantling the luminaire or panel. | Programmable Lighting Control The IP68 MPPT smart controller supports time-based dimming, adaptive brightness, and motion sensor integration. Custom lighting profiles match your exact energy budget and site requirements. |
System Configuration & Specifications
Note: The specifications below reflect a typical 100W reference configuration. Final wattage, battery capacity, pole height, and installation layout are customized per project based on local solar data and lighting requirements.
* Custom configurations available for bulk OEM/ODM orders. Contact engineering for site-specific sizing. | Component | Specification |
| LED Luminaire | 100W High-Efficacy SMD LED — Modular lens design for Type II / Type III distribution |
| Luminous Flux | > 15,000 lm (system level) |
| Solar Panel | 200W Monocrystalline Silicon — Separate mounting bracket with adjustable tilt |
| Battery Storage | LiFePO4 (Lithium Iron Phosphate) — > 4,000 cycles — Capacity sized per project autonomy target |
| Controller | IP68 MPPT Smart Controller — Time-based dimming, motion sensor ready, remote monitoring option |
| Pole | 10m Hot-Dip Galvanized Steel (Q235) — Single arm bracket — Wind resistance ≥ Level 12 |
| Operating Temperature | -25°C to +65°C |
| Waterproof Rating | IP65 (Luminaire) / IP68 (Controller & Battery Enclosure) |
| Color Temperature | 4,000K Natural White (3,000K / 5,000K optional) |
| Suggested Applications | Municipal roads, industrial parks, remote access roads, mining sites, border areas, rural highways |
| Certifications | CE | RoHS | EMC | LVD | ISO9001 | ISO14001 |
| Warranty | 3 Years Comprehensive |
Project Planning Guide — What to Prepare
To receive an accurate quotation and system design, please have the following project inputs ready when you contact our engineering team.
| Project Input | What We Need |
| Road dimensions | Road width, pole spacing, mounting height, number of lanes |
| Location & solar data | Project GPS coordinates — we calculate peak sun hours, rainy season duration, and seasonal irradiation |
| Lighting requirements | Target lux level on road surface, operating hours per night, dimming schedule preference, motion sensor requirement |
| Environmental conditions | Temperature extremes, wind zone, coastal/corrosive exposure, dust/sand conditions |
| Installation scope | Foundation type, cable routing, local approval requirements, commissioning responsibility |
Product & Installation Gallery
Full System Assembly 
LED Luminaire Close-up 
PV Panel Bracket 
Pole Base & Flange 
Battery Enclosure 
Night Illumination 
Component Layout Installation Video — See How It Goes Together
Frequently Asked Questions
When should I choose a split solar street light over an all-in-one design?
Choose split-type when the optimal solar panel direction differs from the road direction — common in mid-to-high latitude regions (30°N+) where panels need south-facing tilt. Split systems also provide easier maintenance access: the battery box sits at ground level or pole base rather than integrated into the luminaire head. For projects requiring > 80W LED output, split architecture supports larger panel sizes and battery capacities that would be impractical in an all-in-one enclosure.
How is the 100W split solar street light sized for different geographic locations?
Each system is custom-sized per project location. Our engineering team uses solar irradiation databases (NASA POWER, Meteonorm) to calculate the worst-month energy budget for your site. We then size the PV panel wattage and battery capacity to maintain full nightly operation through the lowest-sunshine month while accounting for 3-4 consecutive overcast days. Simply provide your project GPS coordinates and we deliver a complete sizing report with DIALux lighting simulation.
What information do I need to provide for an accurate quotation?
Share these five inputs: (1) Project location (GPS or city/region); (2) Road dimensions — width, pole spacing, and mounting height; (3) Target lighting hours and any dimming preferences; (4) Local environmental conditions — temperature range, wind zone, coastal/corrosion exposure; (5) Quantity and timeline. We return a complete proposal within 2-3 business days including system specs, pole structural drawings, and EXW/FOB pricing.
Quality Assurance & Certifications
All E-Able Power products undergo 100% QC inspection before shipment. Factory: Dongguan, Guangdong, China.
Related Solar Lighting Resources
Plan a Site-Appropriate Solar Lighting System
Share your road layout, project location, target lighting hours, and local conditions — our engineering team returns a complete configuration proposal within 2-3 business days.
E-Able Power | Building C, Huiheng Industrial Park, Humen Town, Dongguan, Guangdong, China | sales@e-ablepower.com
