CAN / RS485 protocol with LFP batteries — automatic charge management.

MPPT solar input plus AC charging — hybrid supply reliability.

Overload, over-voltage, over-temperature, short-circuit and more.

Clean 50/60Hz waveform — safe for sensitive electronics.

Hybrid PV + Mains Charging

High-efficiency MPPT solar charger (up to 15kW on the 12KW model) alongside AC mains charging — with lithium battery communication for automatic voltage and current management, or classic lead-acid profiles.

Pure Sine Wave + 10ms UPS

Pure sine wave output (50/60Hz±0.1%) protects motors, medical devices, and electronics; 10ms switchover in UPS mode keeps connected loads running seamlessly through grid failure.

Scalable Parallel System

The 5KW and 6.5KW-P models parallel up to 9 units (12KW up to 6) for single-phase capacity growth — start with one inverter and expand as load or solar grows, all monitored via WiFi APP/cloud.

Q: Which model do I need for my house?

Match the inverter to peak load and surge demand: the 1.2KW suits small cabins and lighting-only loads; the 5KW covers a typical home (lights, fridge, TV, router, pumps); the 6.5KW adds air conditioning and kitchen appliances; the 12KW handles large homes, workshops, or generator-hybrid sites. For capacity beyond a single unit, the 5KW and 6.5KW-P parallel up to 9 units (12KW up to 6). Send your load list for a free sizing calculation.

Q: Can it charge from solar and mains at the same time?

Yes. The integrated MPPT solar charger (12KW model has dual MPPTs, up to 15kW total) works alongside AC mains charging with programmable priority. In solar-first mode, PV charges the battery and feeds loads, with the grid acting as backup; combined PV+AC charge current reaches 100-160A depending on model, and the lithium CAN/RS485 link lets the inverter match LFP battery charge profiles automatically.

Q: What is the difference between the 6.5KW and 6.5KW-P models?

The two share identical power and charging specifications — the difference is parallel capability: the 6.5KW-P includes a parallel interface and can run up to 9 units in parallel, while the standard 6.5KW operates standalone. If you plan to expand capacity later, choose the -P version; the 5KW model also supports 9-unit parallel operation.

Q: What protection functions and monitoring are included?

The series provides eight major protection functions covering overload, short-circuit, over/under-voltage, over-temperature, and battery protection, with overload handling from 102% to over 150% load per model. Monitoring is via optional WiFi (built-in or external) to the APP and cloud — live status, history, and remote settings from a phone or browser. HMI is a full LCD with four-button control.

OFF-GRID HYBRID PLATFORM: Pair the EU Model inverter with E-Able Power GWR/GVR LFP batteries via CAN/RS485 — one supplier, one communication protocol, one warranty.