Solar bollard lights for pathways, car parks and architectural landscapes — grid-free, low-maintenance and built for daily cycles. Impact-resistant and IP65-protected with clean low-level output.
Pathway and boundary bollards engineered in-house with Grade A LiFePO4 batteries, IP65-rated waterproof die-cast aluminum housings and intelligent controllers — zero trenching, zero grid connection, dusk-to-dawn autonomy in any climate.
WOODPECKER TRI-180: 10 W, 2,000 lm, 42Wp monocrystalline, 3.2V 30Ah LiFePO4. A triangular architectural bollard that combines multi-angle solar exposure with efficient pathway lighting for modern landscapes.
READ PRODUCT BRIEF +
Rated power: 10 W
Solar panel: 42Wp monocrystalline
Battery: 3.2V 30Ah LiFePO4
Colour temperature: 2200 K / 3000 K / 4000 K / 6000 K
WOODPECKER CUBE-180: 12 W, 2,400 lm, 56Wp monocrystalline, 3.2V 36Ah LiFePO4. A compact four-sided solar pathway light with a geometric profile, durable aluminum construction and 180-degree illumination.
READ PRODUCT BRIEF +
Rated power: 12 W
Solar panel: 56Wp monocrystalline
Battery: 3.2V 36Ah LiFePO4
Colour temperature: 2200 K / 3000 K / 4000 K / 6000 K
WOODPECKER CUBE-360: 12 W, 2,400 lm, 56Wp monocrystalline, 3.2V 36Ah LiFePO4. A four-sided architectural solar light designed for complete solar exposure and all-around pathway illumination.
READ PRODUCT BRIEF +
Rated power: 12 W
Solar panel: 56Wp monocrystalline
Battery: 3.2V 36Ah LiFePO4
Colour temperature: 2200 K / 3000 K / 4000 K / 6000 K
IK10 vandal-resistant with Dark Sky optics: 6.2W panel, 38.4Wh LiFePO4, up to 280lm, smart PIR sensing, 2200K amber option. For campuses, coastal paths, public spaces.
READ PRODUCT BRIEF +
Solar Panel Technology: 6.2W Monocrystalline Silicon Panel (>22.5% Conversion Efficiency)
Solar Lawn Light CPD-3004 Mini Hourglass: 2W / 5V monocrystalline panel, 3.2V / 3000mAh LiFePO4, 20 pcs, φ185 mm × H500 / 700 mm, IP65. For pathway and landscape lighting.
READ PRODUCT BRIEF +
Rated power: 2W
Solar panel: 2W / 5V
Battery: 3.2V / 3000mAh
Input voltage: DC 3.2V
Working time: 3 – 5 rainy days
Light source: 2835 LED
Lamp colour: Black; other colours can be customized
LETO Solar Bollard Light: 6.2W / 5V monocrystalline panel, 3.2V / 38.4WH LiFePO4, 1.5W >280 lm, φ275 × H300 mm, 2700K–6000K, build-in microwave sensor, IP65.
READ PRODUCT BRIEF +
Rated power: 1.5W
Solar panel: 6.2W / 5V
Battery: 38.4WH 3.2V LiFePO4
Input voltage: DC 3.2V
Working time: 2h100% + 5h30%~70% + 4h20% + 6h(10%+40%)
Light source: 1.5W LED
Lamp colour: Black; other colours can be customized
Luminous flux: >280 lm
Project-ready solar lighting
Factory-direct manufacturing
Engineered and produced in-house with Grade A LiFePO4 cells, IP-rated housings and intelligent controllers.
Configured to your site
Wind resistance, lux levels, autonomy and mounting height optimized for your project conditions and climate.
OEM / ODM customization
Custom branding, housing, materials and configurations developed to match your product line and market.
Compare the range at a glance.
Every value below is taken from the individual product page; nothing is estimated. Open a model for its full datasheet.
Model
Lumen output
Solar panel
Battery
Size (mm)
IP rating
WOODPECKER LINE-1 Solar Pathway Light
1,600 lm
42Wp monocrystalline
3.2V 24Ah LiFePO4
—
—
WOODPECKER TRI-180 Sculptural Pathway
2,000 lm
42Wp monocrystalline
3.2V 30Ah LiFePO4
—
—
WOODPECKER CUBE-180 Solar Pathway Light
2,400 lm
56Wp monocrystalline
3.2V 36Ah LiFePO4
—
—
WOODPECKER CUBE-360 All-Around Pathway
2,400 lm
56Wp monocrystalline
3.2V 36Ah LiFePO4
—
—
CPD-1106 Striped Solar Lawn Light
320.9 lm (3000K) / 308.49 lm (6500K)
5W / 5V
3.2V / 8000mAh
235 mm × 140 mm × H600 / 800 mm
IP65
CPD-2106 Solar Lawn Light
239.89 lm (3000K) / 244.57 lm (6500K)
4.5W / 5V
3.2V / 8000mAh
φ240 mm × 150 mm × H380 / 680 / 880 mm
IP65
CPD-2204 Solar Lawn Light
325.21 lm (3000K) / 346.75 lm (6500K)
4.5W / 5V
3.2V / 8000mAh
φ260 mm × 150 mm × H350 / 650 / 850 mm
IP65
CPD-3004 Hourglass Solar Lawn Light
220.36 lm (3000K) / 198.54 lm (6500K)
4.5W / 5V
3.2V / 6000mAh
φ230 mm × 150 mm × H300 / 600 / 800 mm
IP65
CPD-3006 Solar Lawn Light
232 lm (3000K) / 269 lm (6500K)
4.5W / 5V
3.2V / 6000mAh
φ235 mm × 150 mm × H650 / 850 mm
IP65
CPD-4104 Pumpkin Solar Lawn Light
383.14 lm (3000K) / 408.17 lm (6500K)
4.5W / 5V
3.2V / 8000mAh
φ260 mm × 150 mm × H350 / 850 mm
IP65
CPD-5004 Cube Solar Lawn Light
169.87 lm (3000K) / 168.46 lm (6500K)
5W / 5V
3.2V / 6000mAh
200 mm × 140 mm × H400 / 600 / 800 mm
IP65
CPD-8804 Solar Lawn Light
246.07 lm (3000K) / 259.8 lm (6500K)
4.5W / 5V
3.2V / 6000mAh
φ257 mm × 110 mm × 60 mm (600/800/1000 mm)
IP65
CPD-0406 Solar Lawn Light
97.41 lm (3000K) / 106.38 lm (6500K)
Monocrystalline, 2W / 5V
3.2V / 3000mAh
160 mm × H500 / H700 mm
IP65
CPD-0705 Solar Lawn Light
115 lm (3000K) / 108 lm (6500K)
2W / 5V
3.2V / 3000mAh
φ185 mm × H500 / H700 mm
IP65
CPD-0804 Solar Lawn Light
115 lm (3000K) / 108 lm (6500K)
2W / 5V
3.2V / 3000mAh
φ185 mm × H500 / H700 mm
IP65
CPD-0907 Solar Lawn Light
115 lm (3000K) / 108 lm (6500K)
2W / 5V
3.2V / 3000mAh
φ185 mm × H500 / H700 mm
IP65
Installation: what decides whether a bollard lasts
A bollard sits close to the ground, which is exactly where water, salt, mowers and vehicles are.
Three site conditions decide the specification before the model does. Ground water rules out surface-mounted units: on a site with standing water or a high water table, the bollard needs a concrete plinth or a drainage layer, otherwise the base corrodes from the inside. Coastal air calls for a higher corrosion class on the housing and stainless fixings, because a 30 cm bollard takes salt spray that a 10 m street light never sees. Vehicle proximity decides whether the unit needs impact protection — a car park bollard that will be reversed into should be specified with a barrier or a removable base rather than a heavier casting.
Two installation details are routinely missed. The base plate must be bolted to a foundation, not to paving — pavers settle, and a bollard that leans is a bollard that fills with water. And the panel orientation matters more at low mounting height, because a nearby wall or hedge can shade the panel for part of the day even when it does not shade the surrounding area.
For maintenance, a bollard that opens with two bolts and lifts off its base is a different product from one sealed with eight screws. Ask for the access method before the first service interval arrives.
Matching the model to the space
Bollards light the ground, not the road — the model follows the path width.
A path under 2 m wide is served by a single row of bollards at 2–4 m spacing with 1,600–2,000 lm units, which is the range covered by the WOODPECKER models in the table above. Wider plaza edges and driveway entrances need the higher-output units at closer spacing, or a two-row layout. Where the bollard is decorative rather than functional — lining a wall, marking a step — output matters less than light distribution: a symmetrical spread lights the ground evenly, an asymmetric one throws light along the path.
Do not specify bollards for road illumination. A 1 m bollard cannot light a carriageway at the widths a street light is designed for; it lights the pedestrian edge, and the street light does the rest.
Frequently asked questions
Answers to common questions about solar bollard lights for pathways, car parks and architectural landscapes — light distribution, spacing, height and IP protection.
1
What is a solar bollard light?
+
A solar bollard light is a low-level off-grid luminaire with an integrated solar panel, LiFePO4 battery and LED array housed in a bollard. It illuminates pathways, driveways, car parks and garden edges from low height for glare-free wayfinding and safety, with no cabling or grid connection.
2
How tall are solar bollard lights?
+
Most bollards are 600-1000 mm high, with common full-height options at around 600 mm or 800 mm. The height is chosen so the light spreads across the path without glare, which is why low-level bollard lighting is preferred for pedestrian routes and car park margins.
3
How far apart should solar bollard lights be spaced?
+
Spacing depends on the lumen output, mounting height and required illuminance. As a guide, bollards are often spaced 3-6 m apart for walkways, with wider spacing on car park boundaries. E-Able Power can provide a lighting layout for even distribution across your site.
4
Are bollard lights IP65 weatherproof?
+
Yes. Solar bollards are rated IP65 for waterproof and dustproof outdoor use, with impact-resistant die-cast aluminium and PC diffusers. They are built for year-round exposure to rain, frost and UV in pathways, car parks and landscape areas.
5
What battery and runtime do solar bollards provide?
+
Solar bollards typically use a 3.2V LiFePO4 battery (commonly 8000mAh) charged by a 5W/5V monocrystalline panel, giving dusk-to-dawn operation and roughly 3-5 rainy days of autonomy depending on model and location.
6
Can E-Able Power customise a solar bollard light?
+
Yes. E-Able Power engineers bollards factory-direct for distributors, contractors and project owners — configuring LED output, CCT, height, housing finish, IK impact rating and OEM/ODM branding, with lighting layout and sizing support.
Send your site conditions, lighting requirements or load profile for a system engineered to your location — DIALux simulation, sizing and pricing within 2–3 business days.