[9M DOUBLE-ARM SPLIT SOLAR STREET LIGHT]
-- 9-meter conical Q235 steel pole with hot-dip galvanizing and powder coating -- dual 12V 80W LED luminaires with Lumileds 3030 chips -- 170LM/W high efficacy -- IP66 waterproof -- 3000K-6000K adjustable color temperature -- twin 150W/18V monocrystalline solar panels with over 18 percent cell efficiency -- dual LiFePO4 12.8V 80Ah deep-cycle battery packs with 2000+ cycles -- two 10A smart MPPT controllers with automatic dusk-to-dawn operation -- split architecture for optimized heat management and energy harvesting -- modular design for rapid deployment and lowest total cost of ownership -- designed for large-scale municipal road networks and arterial roads -- free DIALux simulation and wind load certification for municipal tenders -- 5-year warranty -- CE and RoHS compliant -- factory direct from E-Able Power
| Availability: | |
|---|---|
| Quantity: | |
E-ABLE POWER
Split Solar Street Light | 9-Meter Double-Arm 9M Double-Arm Split Solar Street Light — Powerful 80W Dual LED InfrastructureThe definitive choice for large-scale municipal road networks. The Split Design architecture enables high-power monocrystalline panels and massive LiFePO4 energy storage, delivering unmatched brightness and 20+ years of hardware reliability. Dual 80W Lumileds 3030 luminaires at 170 lm/W illuminate both carriageways from a single 9-meter pole — engineered for arterial roads, ring roads and infrastructure corridors. | ![]() |
By housing panels, batteries, and LEDs separately, we optimize heat management and energy harvesting — allowing massive 150W panels for full-night brightness on both carriageways.
Components are modularly engineered for rapid deployment and easy upgrades, ensuring the lowest Total Cost of Ownership (TCO) in municipal lighting.
Equipped with dual 80Ah Lithium Iron Phosphate battery packs, rated for 2,000+ deep cycles and 10+ years of maintenance-free service.
| Component | Technical Specifications | Qty | Design Life |
|---|---|---|---|
| Main Pole | 9M Conical Q235 Steel, Conical Diameter 75-152mm, Hot Dip Galvanized & Powder Coated | 1 pc | > 20 Years |
| LED Luminaire | 12V 80W Lumileds 3030 Chips, 170LM/W, IP66 Waterproof, 3000K-6000K Adjustable | 2 pcs | > 50,000 Hrs |
| Solar Module | 150W / 18V Monocrystalline Silicon (>18% High Efficiency) | 2 pcs | > 25 Years |
| Battery Pack | LiFePO4 12.8V 80Ah, Deep Cycle, Free Maintenance, 2,000+ Cycles | 2 pcs | 5 - 10 Years |
| MPPT Controller | 10A Smart MPPT, Automatic Dusk-to-Dawn Intelligence | 2 pcs | 5 - 10 Years |
| Certifications | CE / RoHS / ISO 9001 / ISO 14001 | ||
Table 1.0 — System specification sheet for the 9M/80W double-arm configuration. Final values to be confirmed with the approved quotation and destination-market requirements. 5-year standard warranty.
LED SMT WORKSHOP
PV PANEL WORKSHOP
GALVANIZED POLE WORKSHOP
LiFePO4 BATTERY WORKSHOP
A double-arm pole mounts two independent 80W luminaires on a single 9-meter structure, illuminating both carriageways of a two-way road from one foundation — halving pole count and civil works versus single-arm alternatives. It is the preferred layout for arterial roads, ring roads and median-lighting schemes where uniform two-sided coverage is required.
The reference configuration pairs two 150W/18V monocrystalline panels with two LiFePO4 12.8V/80Ah packs (2,000+ deep cycles), managed by two 10A MPPT controllers. Sizing is adjusted around local sunshine hours, rainy-season autonomy, dimming schedule and operating hours — the split architecture allows the panel and battery capacity to be up-sized independently without redesigning the pole.
Yes. For municipal tenders our engineering team provides free DIALux lighting simulations and wind-load certifications based on your road width, pole spacing, mounting height and target lux levels. Provide the destination market and project inputs so the applicable drawings and documentation can be reviewed for the selected configuration and local standards.
Design life is component-matched: pole >20 years (hot-dip galvanized + powder coated Q235 steel), LED luminaires >50,000 hours, solar modules >25 years, and battery/controller 5-10 years depending on cycling depth. Maintenance is limited to periodic panel cleaning and annual connection inspection — batteries are maintenance-free, and a 5-year standard warranty applies.
E-Able Power is an ISO 9001 & ISO 14001 certified manufacturer. All split solar street lights are CE and RoHS compliant with 5-year standard warranty.
Browse the split solar street-light range, compare mounting heights or request project support.
9M DOUBLE-ARM CONFIGURATION: Two independent 80W luminaires on one 9-meter pole — ideal for two-way municipal arterial roads and ring roads where pole count, foundation works and total cost of ownership must be minimized.
Our engineering team provides free DIALux simulations and wind-load certifications for all municipal tenders. Send your road layout, mounting height, quantity and operating requirement for configuration guidance and a commercial quotation within 2-3 business days.