Motorised lifting
Cone-rotor motor, worm gearbox and wire rope winch lower the lamp holder for maintenance.
Product overview
Raise the light.
Maintain with ease.
The BSW 10–30 m lifting high-pole light is a complete large-area lighting system: a lamp pole, a lifting lamp holder, a motorised lifting system, an automatic control system and lightning protection.
The pole is built from high-quality steel in 7–12 m sections (conical or circular), and the lamp holder is galvanized steel carrying energy-efficient cutoff LED floodlights that lower to ground level for maintenance.
Selection note: specify the required mounting height, luminaire arrangement and control mode, then confirm the site and wind load before final configuration.
Manual override
Manual winch operation allows the lamp holder to be raised and lowered if power is unavailable.
Cutoff LED luminaires
Energy-efficient cutoff floodlights with adjustable mounting brackets for even large-area coverage.
Automatic control
Power distribution panel with timed, light-sensitive or combined lighting schemes.
Verified specifications
System data, made easy to compare.
Pole & structure
- Mounting height10 m – 30 m
- Pole bodyHigh-quality steel, one-time bending forming
- Pole sections7 – 12 m per section
- Section shapeConical or circular
- InstallationPlug-in or welded
- BaseInstallation flange + electrical door openings
Lamp holder
- MaterialGalvanized steel
- Suspension brackets3 brackets, 120° apart
- LuminaireEnergy-efficient cutoff LED floodlights
- AccessoriesCameras, speakers (optional)
- LiftingElectric / manual
Lifting system
- DriveCone rotor motor + worm gearbox
- WinchWire rope winch
- Manual overrideManual handle winch
- Wire ropeHigh-strength galvanized steel
- Safety factor> 8
- Hook mechanismAutomated hook release / load shedding
Control & protection
- Control panelPower distribution panel
- Lighting modesTimed / light-sensitive / combined
- ProtectionOverload + instantaneous overcurrent
- LightningLightning rod + grounding wire & stake
- Grounding resistance< 10 Ω
Applications
Illumination for squares, ports and transport hubs.
FAQ
Common questions.
1What heights is the BSW high-pole light available in?
+
The BSW10-30 lifting high-pole light is built in 10 m to 30 m pole heights.
2How does the lifting system work?
+
A cone-rotor motor and worm gearbox drive a wire rope winch that raises and lowers the lamp holder for maintenance, with a manual handle override for when power is unavailable.
3How is the lamp holder maintained?
+
The whole lamp holder is lowered to ground level on the winch, allowing lamps to be accessed and cleaned without lifting equipment.
4What control modes are available?
+
The power distribution panel provides timed, light-sensitive or combined lighting control via a microcomputer timer, with overload and instantaneous overcurrent protection.
5Is the high-pole light protected against lightning?
+
Yes. It includes a lightning rod, grounding wire and ground stake with a grounding resistance of less than 10 Ω.
6What luminaires are used?
+
Energy-efficient cutoff LED floodlights are mounted on the lamp holder with adjustable brackets; the arrangement is configured for each project.
7Where can the BSW high-pole light be used?
+
It is suited to large-area lighting for squares, wide roads, overpasses, large parking lots, ports, train marshaling yards and airports.
Project support
Plan your high-mast lighting layout.
Share the site, mounting height and luminaire requirement. Our team can help review a suitable BSW lifting high-pole configuration.