Solar Post Top Series: Professional Off-Grid Architectural Lighting
Manufactured from high-grade die-casting aluminum for superior heat dissipation and extreme corrosion resistance in B2B project environments.
100% wire-free installation eliminates the need for expensive underground cabling and landscape disruption, significantly reducing labor costs.
Industrial-rated protection for internal LiFePO4 batteries and LED chips, ensuring reliable operation during heavy rain, snow, and extreme coastal winds.
Advanced Optic & Energy Integration
Our Solar Post Top Lights utilize high-gain Monocrystalline PV panels paired with intelligent MPPT management. By utilizing high-efficacy LED modules, the system delivers brilliant 360-degree illumination while maintaining deep-cycle battery health for 3-5 nights of autonomy during consecutive cloudy days.
Elevate Your Landscape Infrastructure
E-ABLE POWER provides customized DIALux lighting simulations and dedicated B2B technical support for municipal tenders.
What the pole has to supply
A post-top light drops onto a spigot at the top of the pole: the panel is laminated into the crown, the battery and controller sit underneath, and there is no separate array frame and no cable back to a cabinet. Three things therefore come from the pole rather than the fixture — the spigot diameter, the mounting height, and how much sun the crown actually sees.
The published ZC-TYD2505 architectural variant is made for a 76 mm post. Other heads are supplied for pole-top mounting, and the pole is by the installer unless ordered with the fixture. Because the array lies flat on the crown with no seasonal tilt, array area is capped by head diameter: 400 mm on the compact square models, 1,660 mm on the wide bar.
Which family, and which beam
Both families share the same construction — die-cast aluminium, PC or tempered-glass diffuser, IP65, 3000–6500 K, dusk-to-dawn control and a 3.2 V LiFePO4 battery. What separates them is scale and beam shape: the GGD lanterns top out at 28 W of panel and 96 Wh, while the TYD heads reach 62 W, 320 Wh and 8,303 lm, and add 180° and 90° beams.
| Model | Form | Panel | Battery | Flux | Beam | Head size |
|---|---|---|---|---|---|---|
| GGD-001 | Round lantern | 20 W | 20 Ah (64 Wh) | 822 lm | 360° | 480 × H440 mm |
| GGD-003 | Round lantern | 25 W | 30 Ah (96 Wh) | 1,735 lm | 360° | 530 × H490 mm |
| GGD-2005 | Wide round | 28 W | 30 Ah (96 Wh) | 1,378 lm | 360° | 1,070 × H300 mm |
| TYD-2403 | Square | 20 W | 20 Ah (64 Wh) | 1,163 lm | 360° | 400 × 400 × H420 mm |
| TYD-2505 | Square, low profile | 48 W | 60 Ah (192 Wh) | 3,539 lm | 360° | 580 × 580 × H255 mm |
| TYD-2609 | Round | 36 W | 45 Ah (144 Wh) | 2,650 lm | 180° | φ585 × H550 mm |
| TYD-4208 | Square, tempered glass | 62 W | 100 Ah (320 Wh) | 5,105–5,740 lm | 90° | 590 × 590 × H505 mm |
| TYD-5105 | Wide bar | 52.5 W (18 V) | 60 Ah (192 Wh) | 7,896–8,303 lm | 180° | 1,660 × H435 mm |
A 360° head belongs on a pole standing in the middle of what it lights — plaza, courtyard, roundabout, the centre line of a wide walkway. A 180° or 90° head is for the edge of a lane, where the light has to be pushed along the surface instead of radiating from a point. The full per-model comparison is in GGD vs TYD post-top lights.
Sizing the output in numbers
There is no single lumen figure per pole height. It follows spacing, lit width and target illuminance: total lumens = required lux × lit area ÷ utilisation factor, split across the heads that serve that area. Battery watt-hours then have to carry the night plus the rainy-day reserve — this series is published for 3–5 nights of autonomy on consecutive cloudy days. Every head with its published wattage and flux is listed in the post-top range.
Questions buyers ask
Can a post-top head be fitted to an existing pole?
Often yes, if the spigot diameter and pole-top fixing match. Send the top diameter and a photograph: the head is the only part that changes, and a mismatched spigot delays the order.
How many lumens do I need for a 3 m pole?
No single number: it depends on spacing, lit width and target illuminance. Calculate the total (required lux × lit area ÷ utilisation factor), then split it across the heads that serve that area.
Is IP65 enough for a coastal site?
IP65 covers dust and water jets, not salt corrosion. Ask for the coating specification and the housing alloy, and expect more frequent cleaning.
What do you need in order to quote a post-top scheme?
Pole height, pole spacing, spigot diameter, target illuminance and worst-month sun hours — enough to return a model recommendation, a DIALux check and a price. Two worked configurations: ZC-TYD2505 and ZC-TYD4208.
Products related to this topic
The products referenced in this guide, with their full specifications:
Have a solar or storage project?
Send your site conditions for a system engineered to your location — DIALux simulation, sizing and pricing within 2–3 business days.
